Inline-Pumps Type NCV/NCVL

General

The DICKOW-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petro-
chemical and related industries. Since the pumps are installed inline, only a minimum of space is required and therefore, these pumps are suitable for package units. No time-consuming alignment of couplings is required. Ball bearing failures through inadequate alignment are excluded. With a wide selection of materials and shaft sealing systems, the NCV-pumps are suitable for handling nearly all kinds of liquids used in the above mentioned industries.

For example: acyds, lyes, hydrocarbons, hot water up to 234°C (455°F), hot oil up to 350°C (660°F), cooling fluids, solvents etc.

Construction

The DICKOW-Inline-pumps are single stage, sin-gle-flow volute casing pumps in vertical construction with inline flange arrangement. The drive motor is connected with the pump
casing by a motor support lantern.

Two different designs are available.

Type NCV: The pump shaft is connected with the motor shaft by a clamping device and secured by a key.
Type NCVL: The pump shaft is beared by the bearing bracket of a standard horizontal pump. Power
is transmitted from motor shaft to pump shaft by a spacer coupling. After removal of the spacer, the bearing bracket including shaft seal and impeller can be removed without demounting the motor.

Download (PDF, Unknown)

Serving Western Canada Call Us (403) 214-2049

Inline-Pumps Type NCV/NCVL