J175G1L Heavy-Duty Sludge and Mixed Biosolids PC Pump

J175G1L Sludge and Mixed-Biosolids Pump

The J175G1L Progressive Cavity Pump is ideal for sludge treatment and for pumping both light and coarse sludges and secondary mixed biosolids. The J175G1L’s flow rate is 175 gallons/100 revolutions @ 518 to 788 GPM is coupled to its high temperature resistance of up to 350° degrees Fahrenheit.

All replacement pump parts for the J175G1L series dimensionally interchange with other popular manufacturers pump models like the *Moyno® 2000 Series, the *Tarby® Century V Series, and the *Continental CG Series of Progressive Cavity Pumps as aftermarket replacements.

Sludge and Biosolids Pumping puts heavy rotational forces on a progressive cavity pump. The J175G1L’s heavy-duty construction allows it to perform in the difficult environments of the wastewater industry and liquid sludge and Biosolids transfer field with its heavy-duty construction.

The J175G1L’s low shear and gentle pumping action enables it to pump fluids and not emulsify the liquid making it an ideal mixed-biosolids or a sludge removal and transfer pump with a solids handling capability of up to 50% by weight.

The J175G1L is a standard ANSI flanged pump manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures. Standard suction and discharge flange size for the J175G1L is 10″.
The pump’s modular design comes with a positively sealed, hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating for long-life pumping and a wide selection of stators in Buna Nitrile, Viton®, EPDM and Natural Rubber.

All other wetted parts are either carbon steel or 316 stainless steel. The standard seal design is a set of packing with a Lantern Ring and flush connections. Mechanical seal options are available.

Technical Data

FLOW RATE: 518 – 788 GPM
PRESSURE: 85 – 350 PSI
SEAL OPTIONS: Packing and Mech. Seal
BASE OPTIONS: Steel and Stainless Steel
INLET/OUTLET: 10″ / 10″ – ANSI Flange
ROTORS: Chrome Plated Tool Steel or Stainless Steel
STATORS: Buna Nitrile /Viton®/EPDM/Rubber
MOTOR OPTIONS: 10 – 60 HP

Download (PDF, 1.81MB)

Serving Western Canada Call Us (403) 214-2049

J175G1L Heavy-Duty Sludge and Mixed Biosolids PC Pump