E012G1L Sludge and Sludge Dewatering PC Pump

Progressive Cavity Sludge and Sludge Dewatering Pump

The E012G1L heavy duty progressive cavity sludge pump is ideal for high viscosity liquids and heavy waste solids in the sludge removal and dewatering processes in RAS and TWAS applications.

All replacement pump parts for the E012G1L series such as rotors, stators and internal wetted parts such as seals and connecting rods dimensionally interchange as aftermarket replacements with other popular manufacturers pump models like the *Moyno® 2000 Series, the *Tarby® Century V Series, and the *Continental® CG Series of Progressive Cavity Pumps.

The pumps flow rate of 12 gallons/100 revolutions @ 0 to 54 GPM coupled to its high temperature resistance of up to 350° degrees Fahrenheit.

The E012G1L is a standard ANSI flanged pump design manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, 350 psi discharge pressures making it an ideal low-cost, maintenance free drop-in replacement pump. Standard suction and discharge flange size for the E012G1L is 4″.

The pumps low shear and gentle pumping action enables it to pump delicate fluids and not emulsify the liquid making it an ideal polymer pump or oil/water separation pump. Solids handling capability of up to 50% by weight allows even the toughest application to be pumped.

The E012G1L’s modular design comes with a positively sealed, hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating for long-life pumping and a wide selection of stators in Buna Nitrile, Viton®, EPDM and Natural Rubber.

All other wetted parts are either carbon steel or 316 stainless steel. The standard seal design is a set of packing with a Lantern Ring and flush connection. Mechanical seal options are readily available.

Technical Data

FLOW RATE: 0 – 54 GPM
PRESSURE: 85 – 350 PSI
SEAL OPTIONS: Packing and Mech. Seal
BASE OPTIONS: Steel and Stainless Steel
INLET/OUTLET: 4″ / 4″ – ANSI Flange
ROTORS: Chrome Plated Tool Steel or Stainless Steel
STATORS: Buna Nitrile/Viton®/EPDM/Natural Rubber
MOTOR OPTIONS: 1 – 5 HP

Download (PDF, 1.81MB)

Serving Western Canada Call Us (403) 214-2049

E012G1L Sludge and Sludge Dewatering PC Pump