CORAVAL

This volumetric pump can provide outstanding performance levels owing to its design and the care taken throughout its production:

Single or double mechanical seal or braided seal
Shaft end with straight involute splines in accordance with NFE 22-141
Carbon steel or stainless steel housing
The 2 gear wheels that make up the gear are made of treated steel
The heat treatments are dependent on the conditions of use
Specific bearings for polymers are made of tool steel which is treated then ground
Bronze, carbon or composite materials can be used for certain polymers
Helical gear

Mechanical protection of the pump is provided using a COREAU® CORACOR® type shear pin coupling.

Flanges: ISO, ANSI or others. Pumps complying with API – ATEX stan-dards, etc.

The minimum pressure to be applied to the liquid so that the pump can draw it in, i.e. the required NPSH

(Net Positive Suction Head), is very low, thus giving the pump high suction capacity.

CORAVAL® has the required qualities for pumping the most viscous liquids currently in existence.

Shorter suction head (between the suction flange and the line of action).

Suction side: uniform flow of fluid line.

Acceleration of fluid on constant planes.

Forged block.

Serving Western Canada Call Us (403) 214-2049