FG All-Poly High Purity

Construction Materials
Filtration Media…………………………FDA borosilicate microfiberglass with acrylic binder
Support Media………………………….Spun-bonded polyester laminated on both upstream and downstream sides
End Caps…………………………………Polypropylene
Center Core…………………………………..Fiberglass
Outer Support Cage…………………Polypropylene
O-rings / Gaskets…………………….Buna, Viton, EPDM, Silicone, Teflon® Encapsulated Viton
Toxicity
All polypropylene components meet the specifications for biological safety per USP Class VI: 250°F (121°C) for plastics.
Dimensions
Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter: 2.7 inches (7.0 cm) nominal
Media Surface Area
6 square feet per 9-3/4” length
Maximum Recommended Operating Conditions
Change Out…….??P 35 PSI;
Temperature…….200°F (93°C)
FDA Listed Materials
Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.
Sanitization / Sterilization
Filtered Hot Water ……………….176°F (80°C) for 30 minutes
Steam Sterilization …………..250°F (121°C) for 30 minutes, multiple cycles.
Chemicals: cartridges are chemically compatible with most chemicals and sanitizing agents.
Note: stainless steel insert option needed for all cartridges being hot water sanitized or steam
sterilized.

High efficiency for critical filtration applications
Pleated design for extended surface area
Polypropylene end cap, thermally welded to media, cage and core
FDA Listed Materials for potable water / liquid foods
USP Class VI – 121°C (250°F) for plastics
6 square feet of filtration media per 9-3/4” cartridge
Offered in multiple lengths and end cap configurations to fit in competitive filter housings
Positive charged media

Serving Western Canada Call Us (403) 214-2049